Angular selective
Angular Selectivity is a special case of angular dependence. Angle dependant performance simply means that the relevant property, for example, the transmittance through or reflectance from an illuminated surface takes on different numerical values for different angles of incidence.
The angle of incidence, which is often designated "theta” is the angle subtended between the normal or perpendicular plane to a given surface and a ray of incoming (incident) light. A common example is that any ordinary pane of clear glass will have its highest transmittance value (and lowest reflectance value) for theta = 0° and its lowest transmittance value (namely zero) and highest reflectance value for theta = 90°.
To define Angular Selectivity, we need to introduce a second angle, namely an azimuthal angle or "phi", which describes rotation around the surface normal in a plane parallel to the surface. It is only of interest if the surface is not homogeneous but has some structure which varies according to the azimuthal angle.
Taking a vertically mounted projection and defining the upward direction by phi = 0°, we have angle selective behaviour, because the transmittance for a given fixed theta value is different for different phi values. Using a lamella or louvre array as an example, when theta = 40 ° and phi = 0°, the transmittance is quite low, whereas for theta = 10° and phi = 180°, the transmittance is higher.
If different amounts of light are transmitted, for the same angle of incidence theta, depending on whether the light comes from above or below then the sample is angle selective. By contrast, a homogeneous material like a pane of clear glass is not angle selective; it always has the same transmittance value for a given theta, independent of the value of phi.
[edit] Related articles on Designing Buildings.
Featured articles and news
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.